Automotive Axle Bearing And Hub Assembly Replacement Service

Best Automotive Axle Bearing And Hub Assembly Replacement Service and Cost in Omaha NE
Mobile Mechanics of Omaha

Automotive Axle Bearing And Hub Assembly Replacement Service near Omaha NE: Are you looking for the Best Automotive Axle Bearing And Hub Assembly Replacement Service near Omaha NE ? Mobile Mechanics of Omaha, Our mechanics will show up at your home with state-of-the-art tools and equipment to wheel hub assembly replacement service for your vehicle. We have the know-how needed to fix any type of car or truck. Cost? Free estimates! Send us a message or call us today. Best Automotive Axle Bearing And Hub Assembly Replacement Service around Omaha NE . We serve Omaha NE and other areas.

Get a Free Quote Now!

BEST AUTOMOTIVE AXLE BEARING AND HUB ASSEMBLY REPLACEMENT SERVICE IN OMAHA

Automotive Axle Bearing And Hub Assembly Replacement Service at Home or Office

Automotive Axle Bearing And Hub Assembly Replacement Service near Omaha NE: Your wheel bearings and hubs are an important part of your vehicle’s steering, suspension, and braking systems. Most modern vehicles use a one-piece hub assembly that incorporates the hub, wheel bearing, ABS wheel speed sensor, and mounting flange. Wheel hubs connect the axles, steering knuckles, and the wheels. They are imperative to the steering system because they help support the weight of the vehicle and help turn the wheels.

What is Hub Assembly Replacement?

The wheel hub holds a vehicle’s wheels in place. When properly functioning, the front hub ensures that a vehicle’s tires turn freely, that the ABS system works properly, and that fuel efficiency is normal. A rear wheel hub provides a solid mounting point for the rear wheel to bolt onto and ensures smooth rotation at all speeds. Mobile Mechanics of Omaha, the wheel hub assembly is an essential component of any vehicle. If the wheel hub assembly is not in good operational condition, the wheel can separate from the axle. This is an extreme safety hazard, and a repair should never be delayed.

How is Hub Assembly Replacement Done?

  • Raise your vehicle and support it on jack stands.
  • Remove your lug nuts and pull off the wheel.
  • Remove the brake caliper.
  • Pull off the brake rotor.
  • Remove the axle nut.
  • Lift the new hub into place and thread the bolts by hand.
  • Tighten the hub bolts to your vehicle manufacturer’s recommended torque setting with a torque wrench.
  • Fasten the axle nut to the axle and tighten it to the recommended torque setting.
  • Put on the brake caliper bracket. Install the caliper bracket bolts and tighten them to the recommended torque setting.
  • Put on the brake caliper. Install the caliper bolts and tighten them to the recommended torque setting.
  • Slide on the wheel and thread the lug nuts by hand.
  • Lower the vehicle to the ground.
  • Tighten the lug nuts to the recommended torque setting.

Recommendations

If you suspect that your wheel hub assembly needs to be replaced, you should schedule service from one of our expert mechanics immediately. Replacement of a wheel hub assembly may require specialized tools that are best left operated by professional mechanics.

Symptoms That Indicate You Need A Wheel Hub Assembly Replacement

  • Steering responds slowly
  • Uneven brake application or excessive brake pedal travel before brakes apply
  • Grinding noise from the area of the front hub, located near the center of the vehicle’s wheels, underneath the hubcap.

Our mobile mechanics will show up at your home with state-of-the-art tools and equipment to wheel hub assembly replacement service for your vehicle. We have the know-how needed to fix any type of car or truck. When you contact Mobile Mechanics of Omaha, we may be able to provide you with a quote over the phone. On the other hand, if you don’t know what the issue is, we can investigate and do some diagnostics to get to the bottom of the issue. Our mobile mechanics will treat your vehicle as if it was theirs. You can rest assured that we stand behind the quality of our mechanics’ work. Customer satisfaction is a top priority to Mobile Mechanics of Omaha and our mobile mechanics.

What Is The Severity Of A Failed Wheel Bearing?

Automotive Axle Bearing And Hub Assembly Replacement Service near Omaha NE: The affected wheel could literally fall off. You’d have had to ignore progressively accelerating symptoms for a while, by that point.

Catastrophic failure is possible if the failing bearing is the old-fashioned style that needs periodic adjustment and re-lubrication. Cartridge-style bearings generally fail less dramatically, but nonetheless could leave you with an inoperable vehicle, or even the possibility of losing control of the vehicle in traffic. Allowing the bearing to fail completely also stands the chance of damaging other expensive components like brake calipers and wheel-speed sensors.

The wheel bearing cost of some simpler bearings can be less than $35 for parts and an additional $50 or so for labor, including replacing the seal. That’s basically the same labor cost as cleaning, repacking and adjusting one of these old-school wheel bearings. Replacing a cartridge-style bearing can top $300 for the part, and $100 for labor. Part of the large replacement part cost is that the wheel-speed sensor is sometimes integrated into the bearing, driving up the price. These prices are for a single bearing. It’s usually safe to replace only one bearing that’s been damaged by a curb or pothole. If the bearings are simply worn, think hard about doing both sides at the same time. You also may be able to save some labor costs if your brake rotors and pads could use replacing at the same time.

Keep in mind, pricing will vary by location and your vehicle make and model. If you want to know the wheel bearing cost for your vehicle, start by using Open bay to compare service pricing from quality repair shops in your area.

Wheel Bearings Replacement Service

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnose your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by swerving from side-to-side. For example, if the noise markedly increases when you swerve to the left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.
  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.
  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.
  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All Your Mechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

Automotive Axle Bearing And Hub Assembly Replacement Service near Omaha NE: No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Timken Bearing and Hub Assembly

This component has been around for decades and has consistently improved vehicle performance. It is made of heavy-duty metal to ensure smooth and long-lasting operation. Also, this system is made with precision to reduce friction and enhance fuel economy. It works on Silverado, Suburban, Tahoe, Sierra, and Yukon models.

ECCPP Wheel Bearing Hub

The ECCPP wheel bearing and hub assembly is economical and provides precise fitment, durability, reliability, and enhanced performance. It features a high-quality seal design for pollution protection, bearing cleanliness, minimized noise, and vibration. It is compatible with various Chevy Venture, Pontiac Bonneville, Pontiac Grand Prix, Pontiac Montana, and Pontiac Trans Sport models.

Wheel Bearing & Hub Assembly

If you are looking for comfort, quiet, and efficient performance, then the Detroit hub assembly is the way to go. It is crafted from superior quality materials that provide ABS protection, resistance to abrasion, and protects your axle.

TIPS

While a wheel bearing must support its share of the vehicle’s weight, it must also maintain a perfect radial alignment with the axle. The instant it does not, the rotor pushes the caliper pistons into their bores and drags against the pads.

Even with drum brakes, a wheel bearing must maintain the concentricity of the drum with that of the brake shoes. If the axle moves, the brakes will drag and axle lubricant will leak past the seals onto the brake shoes.

Wheel Bearing Noises

Because most bearings are case-hardened metal, the bearing race begins to develop pits as it fatigues and flakes away from the softer base metal. This results in a pitting or pothole effect on the bearing race, which causes a slight knocking or growling noise as the bearing becomes progressively worse.

One technical tip from the International Automotive Technicians Network (iATN) says that a bad wheel bearing might be detected touching the wheel’s coil spring and spinning the wheel. Vibrations in the spring indicate a bad wheel bearing.  While I haven’t verified that technique, it’s certainly worth a try.

Once removed for inspection, a good greased bearing should have a polished, slightly cross-hatched surface. If the bearing has been operating with excessive end play, the tapered rollers have become barrel-shaped and will not hold the hub perpendicular to the axle. If the polish is gone and the cross-hatch is worn away, the bearing should be discarded.

Drivetrain Bearing Noises

Sometimes, the growling bearing noise we hear is generated in the vehicle’s drivetrain. In general, automatic transmissions use bushings rather than ball or tapered roller bearings to support loads, so the bushings rarely cause a noise, but manual transmissions do use bearings in their input, counter, and output shafts.

Removing Bearings

Inexperienced techs can seriously injure themselves and permanently damage the new bearings by using improper installation techniques. Because bearings are brittle and likely to shatter like glass, it’s extremely important to wear shatterproof safety glasses and to cover the bearing with a scatter shield when pressing the bearing on or off a shaft.

Replacing Bearings

Several OE and aftermarket tool manufacturers supply tools to install sealed ball bearings in front-wheel and all-wheel drive applications. These tools guarantee a flawless installation, and drastically reduce the installation time.

Cleanliness Equals Long Life

Always use a high-temperature, bearing-rated or manufacturer-specified grease to repack new or used wheel bearings. Common chassis lubricants seldom provide the high-temperature lubrication characteristics needed by wheel bearings.

COST

How Much Does It Cost to Replace Your Wheel Bearing & Hub Assembly?

Automotive Axle Bearing And Hub Assembly Replacement Service near Omaha NE: The cost of replacing your wheel bearing depends significantly on the car make, model, year, and the mechanic. Therefore, without this information, it is very challenging to determine the overall cost.

In general, replacing a wheel bearing can cost between $100 and $700; on average, it could cost $300.

Besides the car make, model and year, the cost of wheel bearing replacement can depend on the shop or mechanic who will do the work for you.

Many experts suggest that higher labor costs higher work quality. However, this is not always the case. Some well-known companies might have very high costs just because they are famous.

Therefore, if you want to get your wheel bearings replaced, make sure to shop for multiple quotes and select what works best for you. The selection does not have to be based on price, and you might need to check for customers’ satisfaction and reviews. This way, you can confirm a higher work quality and save yourself lots of hassle in the future.

The good idea is to have multiple repairs at the same time to save labor costs. For example, if you know that you will need to repair your brakes or alignment soon, consider fixing them together.

Wheel bearing replacement cost also depends on the hub assembly as the non-serviceable hub assembly can cause up to $400 to $800. Prices can go much higher in non-serviceable hub assembly with a bearing press.

The car makes, model and year can play a significant role in the price of wheel bearing replacement.

For example, replacing a wheel bearing for a Scion TC can cost between $250 and $358 with about $202 – $256 of labor cost and $48 – $102 of parts value. Usually, the Scion TC wheel bearing replacement is not done separately, it can be combined with Brake Pad replacement with $233 – $297 or Steering Knuckle replacement of $518 – $297.

Below are examples of how much does replace a wheel bearing cost for several cars models:

Vehicle Model        Wheel Bearing Replacement Cost

Ford F-Series                        $402-$745

Ford Fusion                          $436-$577

Chevrolet Silverado            $850-$1487

Honda Civic                          $414-$572

Honda CR-V                          $612-$728

Toyota Camry                      $402-$551

Toyota Corolla                     $620-$862

Honda Accord                      $539-$738

Nissan Altima                       $605-$810

Ford Focus                            $624-$879

FREQUENTLY ASKED QUESTIONS

What causes Wheel Bearings to go bad?

Wheel bearings can generally last for a long time; however much of this depends on driving habits, type of vehicle, driving conditions and other external factors. Driving on rugged terrain or hitting potholes and curbs can all contribute to wearing down wheel bearings. If the seals of the bearings are compromised – air, dust, salt, sand and other contaminants can get inside to corrode or damage parts. Once this occurs, it can break down the lubricants and other components causing friction. If a bearing gets really hot, cages and seals could be deformed and lead to bearing lock-up. This may feel like the parking brake has been applied. You may notice resistance in trying to accelerate.

When should I have Wheel Bearings replaced?

Wheel bearings should last for quite a while. If your car is operating fine, you may want to have the wheel bearings inspected about every 30,000 miles. Otherwise, if you notice any of the warning signs listed above, you should have your vehicle examined promptly. A certified technician can properly advise you on when or if it’s time to replace your bearings.

My wheel bearings are making noise. What could be the issue?

The most common and often most identifiable symptom associated with a bad wheel bearing is noise coming from the wheel or tire area of the moving vehicle. If you listen closely you are likely to hear grinding or grating that gets louder as the vehicle accelerates. It’s not a common occurrence, so the noise may be misinterpreted as something else. This could be an early signal of an issue with your wheel bearing and should not be ignored.

How can I determine which Wheel bearing is bad?

Unless you’re a skilled mechanic, it may be challenging to identify which wheel bearing is bad. You may hear unusual noises, but it’s difficult to pinpoint the origin. With the proper tools and equipment, some people are able to elevate the vehicle and then check each tire for looseness. If there is extra play, that may be the culprit. For most drivers, it’s best to bring the vehicle to a reputable tire service center to have the vehicle properly inspected.

How long does it take to replace Wheel Bearings?

Replacing a single wheel bearing can take 90 to 120 minutes depending on the type of vehicle and complexity. There are a lot of moving parts that need to be maintained and properly sealed to complete this type of work.

How Often Should You Replace Your Wheel Bearings?

All vehicles need a wheel bearing replacement at some point in the vehicle’s life.

Most modern cars come with a seal on the wheel bearings, which require replacing the wheel bearing after 100,000 miles. However, older vehicles might need a wheel bearing to check every 25,000 to 30,000 miles. This does not necessarily require replacing the motor bearing rather than making sure they are well-maintained.

How Can You Extend the Wheel Bearing’s Life?

The first thing you need to do to have a longer-living wheel bearing is to drive on the right roads. If you drive on bumpy unpaved roads, you are most likely reducing the capability of your bearing and therefore shortening its life.

CALL FOR US:

  • Automotive Axle Bearing And Hub Assembly Replacement Service Near Omaha NE
  • Wheel Hub Assembly
  • Wheel Hub Assembly Replacement Cost
  • Front Wheel Bearing Hub Assembly Replacement Cost
  • Wheel Hub Assembly Vs Wheel Bearing
  • Wheel Bearing Replacement
  • Best Wheel Bearing Hub Assembly Omaha NE
  • Replace Wheel Bearing Or Hub Assembly
  • Car Hub Bearing Replacement Cost
  • Rear Wheel Bearing Replacement Cost
  • Wheel Hub Replacement Cost
  • How Much Does A Wheel Bearing Cost To Get Fixed
  • Wheel Hub Assembly Replacement
  • Firestone Wheel Bearing Replacement Cost
  • Replace Wheel Bearing Or Hub Assembly
  • Wheel Bearing Replacement
  • Wheel Bearing Cost AutoZone Omaha NE

Service Area:

  • Arlington NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Ashland NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Avoca IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Avoca NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Bellevue NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Bennington NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Blair NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Boys Town NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Carson IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Carter Lake IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Ceresco NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Council Bluffs IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Dunlap IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Eagle NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Elkhorn NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Fort Calhoun NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Fremont NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Glenwood IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Greenwood NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Gretna NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • LA Vista NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Lincoln NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Logan IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Louisville NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Malvern IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Mead NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Missouri Valley Ia Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Murray NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Oakland IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Omaha NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Pacific Junction IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Papillion NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Plattsmouth NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Ralston NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Springfield NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Underwood IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Valley NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Wahoo NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Waterloo NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Weeping Water NE Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Woodbine IA Automotive Axle Bearing And Hub Assembly Replacement Service near me
  • Yutan NE Automotive Axle Bearing And Hub Assembly Replacement Service near me